🏭Industrial Automation

Plywood Production Automation

TIBS end-to-end automation for plywood pressing - one-touch start, precise pressure/temperature control, thickness anomaly detection, and damage-free rack lowering. Eliminate manual errors and maximise yield.

System Overview

TIBS Plywood Press Automation

From operator start to damage-free rack lowering - fully autonomous

TIBS plywood production automation - pressing machine, control console, sensors, and rack lowering system
Fully automated plywood pressing line: one-touch operation, mm-accurate thickness monitoring, and controlled rack descent
Console
Start / Stop
Press Lift
Pressure + Temp
Curing
Time by thickness
Thickness Check
mm accuracy
Rack Lowering
Controlled descent
Temperature Control Pressure Regulation Anomaly Alert Damage-Free
Why TIBS Plywood Solution

Key Benefits of Plywood Press Automation

Reduce waste, improve consistency, and protect your final product

Zero Manual Error

Eliminates operator mistakes in lifting, pressing, and lowering - reducing scrap and rework by up to 90%.

Consistent Quality

Every panel produced under identical conditions - same pressure, temperature, and curing time based on thickness.

Thickness Accuracy ±0.5mm

Real-time monitoring ensures final product meets dimensional specs. Anomalies flagged immediately.

Damage-Free Lowering

Controlled rack descent prevents tearing - a common failure point in manual operations.

Higher Throughput

Automated cycles run faster and more consistently than manual, increasing daily production capacity.

Full Traceability

Log every cycle's parameters. Perfect for ISO certification and customer quality claims.

Capabilities

What This Automation Delivers

End-to-end control of the plywood pressing cycle

Core System Features

  • One-touch start from operator console - fully automated cycle
  • Pressing machine lifts automatically with precise pressure & temperature control
  • Curing time dynamically adjusted based on plywood thickness
  • Real-time monitoring of production parameters (pressure, temperature, duration)
  • Anomaly detection - reports thickness deviations with mm accuracy
  • Controlled rack lowering - prevents tearing of finished plywood sheets
  • Eliminates manual errors that cause costly product damage
  • Complete production data logging for quality traceability

Technical Specifications

Thickness Monitoring
  • Accuracy: ±0.5 mm
  • Real-time feedback loop
  • Anomaly threshold configurable
Press Control

Hydraulic press interface, temperature PID loop, and recipe-based curing time (e.g., 3 min per mm thickness).

Solution Components

Plywood Automation Subsystems

Integrated hardware and software for reliable production

Pressing

Automated Press Control

Intelligent lifting and curing of plywood layers under optimal conditions.

  • Operator presses start - system takes over
  • Lifts press plate to programmed height
  • Applies exact pressure based on plywood type/thickness
  • Maintains temperature setpoint throughout curing
  • Auto-adjusts curing duration (minutes per mm)
Request a Quote
Quality

Precision Monitoring & Anomaly Detection

Continuous quality assurance with sub-millimetre accuracy.

  • Real-time thickness measurement (mm precision)
  • Pressure & temperature sensors on press plate
  • Anomaly alerts when parameters drift out of spec
  • Automatic rejection flag for off-spec panels
  • Historical data for root-cause analysis
Request a Quote
Safety

Controlled Rack Lowering

The most critical process - prevents tearing of finished plywood.

  • Gradual, servo-controlled descent of racks
  • Multi-stage release to avoid sudden stress
  • Position feedback from linear encoders
  • Emergency stop logic for operator safety
  • Eliminates manual lowering errors (common cause of scrap)
Request a Quote
Management

Production Console & Data Logging

Centralised control and traceability for batch manufacturing.

  • Touchscreen operator console with start/stop/emergency
  • Recipe management for different plywood grades
  • Real-time dashboard of current cycle parameters
  • Complete production log (time, thickness, anomalies)
  • Optional cloud sync for remote supervision
Request a Quote

Ready to Automate Your Plywood Press?

From one-touch operation to damage-free rack lowering - let TIBS transform your plywood production line.

Request a Live Demo

Free consultation - we'll help you design a system for your press size and production volume.